Inverter vs non-inverter (fixed-speed) AC
The compressor is the part of an AC that uses most of the electricity. The difference between the two types is how that compressor runs.
How they work
- Fixed-speed (non-inverter): the compressor runs at full power until the room reaches your set temperature, then switches off. When the room warms up again, it switches back on at full power. You get a cycle of on, off, on.
- Inverter: the compressor changes its speed. It runs fast to cool the room down, then slows down to keep it at that temperature, without switching fully off and on.
What that means for you
| Fixed-speed | Inverter | |
|---|---|---|
| Price to buy | Lower | Higher |
| Electricity use over long hours | Higher | Lower |
| Temperature | Swings up and down | Steadier |
| Noise | Clicks on and off | Usually quieter at low speed |
| Handles voltage swings | Often needs a stabiliser | Many models work across a wide voltage range (check the maker’s spec) |
Which should you buy?
For most homes that run the AC for several hours a day, an inverter split AC is the better buy: it uses less electricity, and the saving grows with each hour of use. Most split ACs sold in India today are inverter models.
A fixed-speed AC can still make sense if you’ll use it rarely and the price gap is large. Use the running-cost guide to see how long the gap would take to repay.
“Convertible” modes
Many inverter ACs are sold as “convertible” (for example “5-in-1”). This lets you cap the AC at a lower capacity, such as running a 1.5 ton AC as if it were 1 ton, to save power on milder days. It’s a handy feature, but compare models on their cooling capacity and ISEER, not on the number of modes.